MVR Steam Compressor | Energy Saving Roots Compressor
MVR Steam Compressor | Energy Saving Roots Compressor

MVR Steam Compressor

HDAirus MVR steam compressor uses Roots technology to recover secondary steam energy, reduce steam consumption, and improve industrial evaporation efficiency.

Pressure65-98KPA
Capacity2-216M3/MIN
Contact US Now
Product Overview

Product Introduction

MVR is the abbreviation of mechanical vapor recompression. MVR is an energy saving technology by reusing its steam energy, to reduce the need of external energy.

 

Its theory is compressing the steam produced by evaporator, increasing its pressure and temperature ,so does the enthalpy of steam. It conveys the steam into heating chamber of the evaporator to be used as heated steam, and keeping the liquid material in boiling condition, the steam would condense into water. In this way, it will take advantage of the secondary steam and reach the goal of energy saving.

 

In recent years, this technology has been widely used in chemical, medicine, waste water treatment, seawater desalination in abroad. Its working process is to compress the secondary steam to increase is temperature, pressure as well as the enthalpy, then the steam come into the heat ex-changer for heating and condense, to take advantage of the steam's latent heat.

 

This technology need fresh steam when starting, it only need to be feed with proper fresh steam during operation (not very large quantity).


Technical Parameters

Specifications

MODELFLOW RATE RANGE(M3/MIN)INLET AND OUTLET PRESSURE DIFFERENCE(KPA)TEMPERATURE RISE(℃)EVAPORATION CAPACITY(T/H)
HDSR-80WN/100WN2-798200.03-0.1
HDSR-125WN3.8-8.298200.15-0.25
HDSR-150WN9.8-2098200.2-0.6
HDSR-200SWN14.8-2898200.5-0.9
HDSR-200WN19.8-4298200.7-1.3
HDSR-250WN40-8085201.1-2.3
HDSR-300WN59-11675202.0-3.2
HDSR-350WN104-15675202.5-4.2
HDSR-400WN150-21665203.5-5.2
Inlet temperature below 105 degrees Celsius, pressure below 1bar.


Core Engineering

Technical advantages

1.High intensity steam compressor is made by heavy frame and overall cast iron CNC precision machine. Meanwhile installing another precise positioning link.

 

● Low noise, low vibration, stable operation

 

2.All the parts are machining by integrated processing center in our company workshop, with much more precise dimensional tolerance. Bearing position and side plate are processing integrated, to ensure accurate position of the bearings.

 

● Ensure precision, uniform size of all parts to meet all steam compressor operation condition and changes in working conditions.

 

3.Impeller is made of S304/S316/S316L/2205(duplex stainless steel) etc material, and use high precision four-axis machining. Precise shape and size and fix to the steel shaft permanently

 

● With special strength and stiffness, impeller operation more stable, fatigue and deviation does not occur even under persistent high load condition

 

4.Steam compressor using Japan imported NSK or Sweden SKF bearings, its lifespan is around 26000 hours under steam compressor constant running condition. Good maintenance will extend the lifespan.

 

● Using the best bearing and improve operation lifespan for heavy load application.

 

5.Steam compressor fix the precision processing timing gears which is made of alloy steel to the shaft permanently. Synchronous gears adopt splash lubrication oil.

 

● Ensure continuous operation under most severe load condition. High precision and low friction coefficient gears save more energy.Timing synchronization gears still have anti-slip properties.

 

6.Steam compressor using special double mechanical water seal system,to achieve zero leakage.

 

● Practice has proved that this sealing system designed entirely trouble-free operation in the application of critical gases.

 

7.Steam compressor using circulating water lubricating system, which improves the service life of its bearings and gears, and avoids the disadvantages of the traditional lubricating system of using lubricating grease or oil.

 

● Easy maintenance and observe, avoid the situation that burn off the bearing and gears because of lack of oil .

 

8.Steam compressor is made of S304/S316/S316L2205(duplex stainless steel) etc material, and it is resistant to cavitation, water erosion, erode.

 

● Special coating could keep long time usage, and reduce investment cost. If using pure titanium or stainless steel steam compressor, then its cost would be very high.

 

9.Steam compressor outlet temperature is controlled through inlet nozzle spraying water

 

● Generate stable saturated steam, and effectively regulate the outlet temperature.

 

10.Steam compressor all assembling with variable frequency motor which can be adjusted according to actual capacity requirement.

 

● Variable frequency motor plays good role in the start-stop system.


Quick Answers

FAQ

How does an MVR steam compressor save energy? −
It recycles secondary steam and its latent heat, reducing the need for external steam in evaporation processes.
What materials are used in the MVR steam compressor? +
It uses stainless steel materials, including SS304, SS316, SS316L, and duplex stainless steel 2205.
Which industries use MVR steam compressors? +
They are widely used in wastewater treatment, chemical processing, pharmaceuticals, food production, dairy, and beverage industries.
WhatsApp WhatsApp WhatsAppScan to follow Email Emailinfo@huadongblower.com Email Message Board
0.112025s